Step-by-Step Guide to Hooking Up Electrical and Gas for Machine Setup
Step 1: Electrical Connection
- Ensure your machine has a dual voltage capability (110V to 220V).
- Identify the electrical cord hookup at the back of the machine.
- Plug in the cord. The machine automatically switches between voltages.
Step 2: Gas Connection Precautions
- For gas hookup, regulate the air properly.
- Maintain gas pressure between 60 and 100 psi max, ideally around 80 psi max.
- Incorrect pressure can lead to malfunctions or damage.
Step 3: Accessing the Back of the Machine
- Turn the machine to view the rear side for gas and electrical connections.
Step 4: Gas Hose and Identification
- Locate the 20-foot hose at the back of the machine.
- Note: A white light indicates an international machine; a greenhouse symbol is for domestic (US).
Step 5: Hose Placement
- If needed, position the machine based on the distance to the hookup spot.
- Ensure a secure and reachable location for easy connection.
Step 6: Connecting Gas Hose
- Prepare two wrenches: 11/16 inch and 5/8 inch.
- Carefully connect the hose to the gas inlet on the machine.
- Tighten both ends with wrenches to prevent leaks.
Step 7: Check for Leaks
- Once connected, turn on the gas.
- Listen for any hissing sounds, indicating gas leaks.
- If leaks are detected, halt and fix the issue before proceeding.
Step 8: Finalizing Setup
- Ensure both electrical and gas connections are secure.
- Verify there are no gas leaks.
- Lock the machine's wheels to secure its position.
Remember, safety is crucial during this process. Double-check your connections and gas pressure to avoid any potential issues.
